How far down do you drain your inground pool for winter?
Drain the water down to no more than 6 inches from the bottom of the skimmer if you plan to use a standard floating winter cover. Use your pool filter, switched to the “Drain” setting, to empty the pool water.
Should I shock my pool before closing for the winter?
Shocking kills any bacteria that might linger in your pool during the winter. We recommend shocking a few days before you close the pool. If that is not possible, make sure to shock the pool the night before you close it for winter.
How do you winterize an inground concrete pool?
Here is how to winterize your in-ground concrete pool in six easy steps.
- Step 1 – Balance the Water Chemistry. …
- Step 2 – Lowering the Water Level. …
- Step 3 – Add the Necessary Chemicals to the Pool. …
- Step 4 – Thoroughly Cleaning the Pool Filter. …
- Step 5 – Blowing the Lines. …
- Step 6 – Use Skimmer Bottles as a Precaution.
How do I prepare for my pool closing?
Ten Steps to Closing your Pool the Right Way
- Balance water chemistry: The week you’re closing your pool, make sure your water falls within the ranges below. …
- Add shock and algaecide: …
- Clean pool: …
- Store equipment: …
- Lower water level: …
- Drain pump, filter, chlorination and heating equipment: …
- Lubricate: …
- Winterize plumbing:
Do you leave water in a pool over winter?
Close the pool for winter – but don’t drain it.
In winter, the water in your pool is still your friend. Especially when properly winterized, it helps to protect the pool liner, keep it clean and prevent unnecessary damage from debris, harsh weather and other factors.
How do you close a pool permanently?
Use a jackhammer, sledgehammer, or other tool to smash holes into the bottom of the pool. This will allow water to drain out of it in the future. Remove any top decking concrete walkways, coping tiles and any other concrete around the pool that you don’t want anymore. Toss it into the pool over the holes you have made.
Should I backwash before closing my pool?
#6: Backwash Your Filter
You want to let your run for a full cycle before backwashing and chemically cleaning your filter before closing your pool.
Should I add algaecide when closing pool?
By simply adding algaecide to your water prior to closing, you can prevent algae growth from occurring during the cold, winter months which makes for an easier opening in the spring. You can apply algaecide directly to the pool water and allow the pump to continue to circulate for approximately two to four hours.
What can be done with an unused inground pool?
50 Alternative Uses for Your Empty Pool
- Skate park.
- Bulldog skate park.
- Roller rink.
- Racquetball court.
- Handball court.
- Volleyball “equalizer” court (tall folk in the deep end, short folk in the shallow end)
- Dog park.
- Cat corral.
Whats included in a pool closing?
Inground Pool Closing Highlights
The Inground Pool Closing is all-inclusive and includes a LIQUID CHEMICAL closing kit consisting of chlorine, algaecide, and clarifier designed to give your pool water the boost it needs to make it through a long winters rest.
What does pool closing include?
Your pool closing checklist should include the following tasks: Vacuum and scrub the surfaces. Remove algae. Use a skimmer basket to clean any debris.
What chemicals do I need to winterize my inground pool?
What chemicals do I need to close my pool?
- Pool Shock.
- Soda Ash.
- Baking Soda.
- Muriatic Acid.
- Winter Algaecide.
- Pool Antifreeze.
- Stain and Scale Prevention.